Bison Kit® All Purpose Contact Adhesive 140 ml (BIS-6309530)

• Bonds immediately
• Super-strong
• Suitable for materials under stress
• Universal
• Liquid
• Moisture and frost resistantSimple to use
• Resistant to temperatures between -40°C and 70°C

Instruction to Use:

• Parts must be clean, dry and free of grease. Coat both substrates completely. Allow drying for a minimum of 10-40 minutes. In case of porous materials, apply a second coat and let dry. Then join parts and roll or tap firmly (with a rubber mallet).
• Points of attention: For optimum results, both the adhesive and the parts to be bonded must be at room temperature (definitely do not use below 10°C). The final bonding strength depends on the pressure applied. Therefore, press as firmly as possible across the entire surface. Should the adhesive joint between porous materials be exposed to long-lasting contact with water, the adhesive may detach from the wet surface.

Storage conditions:

Store properly closed in a cool and frost-free place. Shelf life is a minimum of 24 months.